Black 300W Ceramic Resistor Igniter for Pellet Stove with Ceramic Flange

• Certification: RoHS, UL, ISO9001, CE
• Type: Electric Coil
• Material: Alumina Ceramic
• Form: Heating Wire
• Shape: Tubular
• Type.: 300W Ceramic Resistor Igniter
• Leads: Ceramic Biomass Igniter
• Product Name: Ceramic Pellet Ignitor for Fireplace
• Resistance: (40-200)Ohm
• Voltage: 120-250V
• Standard Dimension: L=94mm,D=17.5mm
• Applicaiton: Pellet Stove/ Biomass Boiler
• Ignition Time: 900deg C in 60 Seconds
• Name: Ceramic Igniter for Pellet Stove
• Power: 150W-300W
• Working Temperature: 900degc-1100degc
• Cable: 50mm Long High Tem. Cable
• Length*Od*ID: Be Customised or Already Open Models
• Usage: Pellet Grills, Pellet Smoking and BBQ
• Holder: Ceramic Holder or Copper Thread
• Transport Package: Box
• Specification: Customized
• Trademark: Jory
• Origin: Fujian, China
• HS Code: 85168000
• Production Capacity: 55000 Piece/ Month

Product Description

Black 300W Ceramic Resistor Igniter for Pellet Stove with Ceramic Flange

Ceramic Pellet Igniter consist of Al2O3 insulation ceramics with an integrated W conductor, and reach a

 

permanent operation temperature of between 900°C and 1100°C.

	Part No.	JORY108115
	Usage	ignition
	Working Voltage	120 VAC/ 230VAC
	Power	160 W / 180 W / 210 W / 225 W / 230 W / 240 W / 255 W
	Dimension of product	Existing Sample: OD11.5*ID6.5*108MM,  Holder Size: D17.5*35MM Customized sample is acceptable
	Lead wire:	300mm / 400mm / 500mm / 900mm (Customized is accept)
	Electrode	Welding leads on the electrode
	Advantages	Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket Air can flow through and around inside and outside of heater Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C Lifetime up to 100,000 heating cycles, depending on operating conditions Oxidation and corrosion-resistant Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures - the ideal ignition blower! Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible.

 

Alumina Ceramic Heater Design Structure

Ceramic Heaters are manufactured by printing resistors on alumina shees,being laminated and sintered into one pieces* Types:

Rectangular alumina ceramic heating element
Round shape alumina ceramic heating element
Rod shape alumina ceramic heating element

Tube shape alumina ceramic heating element

Pellet Igniter Supplier Advantages:

1) Higher temperature, about twice of traditional metal sheathed heater;

2) Shorter ignition
time, about 60~90 seconds

3) Electrically insulated with no exposed electric contacts

4) Wear and corrosion resistance

5) Long life time

6) Easy to install and replace

Pellet Stove Igniter Benefits:

A fraction of the energy consumption compared to conventional cartridge or element heater.
Long-lasting (non-aging). Time to ignition 60~90 seconds. Tested to 100,000 cycles. Easy to install and retrofit. 800~1100°C at steady-state temperature. Impervious to oxidation and corrosion. Igniter kerosene, wood chips, split logs, coal briquettes or other biomass, corn, etc.

Thermal Properties for Alumina Heater
Item	Unit	Value
Vickers Hardness	Gpa	11.5
Flexural Strength	Mpa	300
Compressive Strength	Mpa	2000
Modulus of Elasticity	Gpa	300
Poisson's Ratio	---	0.22-0.23
Fracture Toughness	Mpam^1/2	3.5-4.0
Thermal Conductivity	W/(m·k)	25
Thermal Expansion Coefficient	10^-6/ºC	6.5-7.5
Thermal Shock Resistance	△TºC	200
Maximum Use Temperature	ºC	1600
Dielectric Strength	KV/mm	>12
Dielectric Constant	εr	9-10
Dielectric Loss Angle (1MHz)	---	0.0002
Volume Resistivity	Ω.m	>10^15
Specific Heat	J/(kg·k)	0.78x10^3

 

Not without reason, the high temperature heating elements pellet igniter is the reliable standard ignition system for pellet heating systems in Europe-hundreds of satisfied customers speak for themselves.

Mass customization is available. we can open molding according to you your design drawing.
 

Our Certificate

ISO 9000; RoHS REACH

Inspection Standard

To ensure the quality of products, the in-process inspection and sampling inspection should be taken which based on the regulation of National GB/T 2828-2003.

Part 1.Sampling inspection of AQL standard.

In-process inspection VS Sampling Inspection

 

Inspection items	In-process inspection	QC sampling inspection
		Inspection level	Acceptable quality level (AQL)
Appearance	100% inspection		1.0
Straightness	100% inspection	S-4	1.0
Dimension	100% inspection		1.0
Power-on Test	100% inspection		0.40
Dielectric Strength	100% inspection		0.65

About our factory: 
our Product Equipment



Related Products

We can also provide other different types ceramic igniters such as 150w, 250w and 300w; black and white.

Ceramic igniter for pellet stoveIgnition resistance for pellet stoves, with 3/8'' brass flange
Hermetic/ perforated version.
Diameter: 11.55 mm.
Overall length: 107 mm.
Power: 300 Watt.
Maximum temperature: 1100 ° C
We also have other types like 250w, 150w ceramic igniter and other shape.

Detail Images


RFQ
1.What's the max using temperature ?

Max 1700degree

2.Which composition suitable for metallized ceramics?
95%, 96% alumina

3.What's the 99 alumina's major applications?
Pump Shaft,Drive Shaft,Sealing Ring

4.Can you do OEM?
We are mostly doing by drawing

5.What's the delivery time?
About 20days

Our products family photo